Abatek can manufacture SMD-silicone keys within a few days, whose features are corresponding to the guideline of the customers. The height of the keys, the stroke, the actuation force, the colour and the type of the contact pills are some examples of the parameters to choose. More than 1 million combinations are actually possible. The keys can also be fitted out with an additional capacitive switching function, in order to cause an event, for example, already by approaching them.
Essemtec, the Swiss manufacturer of high flexible production systems for electronics, has optimized the pick & place machines for the processing of the new silicone keys in team work with Abatek. As from now, the automatic insertion of all entry key types at all pick & place systems of the FLX-, CSM- and Pantera-series is possible. Tape feeders with enough pocket depth are deliverable as standard and for prototyping flexible tape strip feeders are available. The maximum height of the components of the above-mentioned machines is at 15 mm and the clearance zone below the printed board at up to 40 mm. Thus enough space to insert silicone keys even on the front- and rear side of a PCB. The keys themselves resist the solder temperature smoothly, even at several carry outs.
The silicone keys are processed with an especially developed vacuum tool therefore, which picks up the entry keys safety from the belt or the pallet and places it exactly at the printed board or flex board. The vacuum tool of Essemtec can be used for all types of prototypes of Abatek. For example keys with different height can be placed with the same tool at the same product. If necessary, e.g. the customer needs a very specific form of keys, the Swiss manufacturer is able to adjust the vacuum tool in no time, correspondingly.
www.essemtec.com & www.abatek.com
EPP Europe 532
