Skip to content
EPP Europe
  • News
  • Products
  • Applications
  • Technology
  • Semiconductor
  • Inspection
  • Company News
  • Events
EPP Europe
  • Technology
  • Inspection (AOI/AXI)
  • Semiconductor Packaging
  • Company News
  • Products
  • Trade Shows & Events
    EPP Europe Newsletter
    The most important electronics-manufacturing news delivered to your inbox.

    Info

    • Legal notice
    • Privacy
    • Accessibility
    • Privacy settings

    Editorial contact

    EPP EuropeKonradin Mediengruppe
    Ernst-Mey-Str. 8, 70771 Leinfelden-Echterdingen

    E-Mail: redaktion@konradin.de
    Follow us
    EPP Europewirautomatisierer.debatterie-produktion.dekunststoff-report.dedeutsche-ernaehrungsindustrie.depharma-prozesstechnik.de
    © 2026 EPP Europe
    Home/Technology/Article
    Advanced Technology & Manufacturing boosts performance with Ersa selective system
    The Ersa VERSAFLOW 4/55 in the electronics manufacturing facility of Advanced Technology in Perth · Foto: Ersa
    Technology

    Advanced Technology & Manufacturing boosts performance with Ersa selective system

    Advanced Technology & Manufacturing (AT&M) is one of Australia’s leading electronics contract manufacturers. Over more than 30 years, AT&M has evolved into a fully integrated EMS service provider covering the entire spectrum of PCB assembly – including surface mount and through-hole assembly – along with related services. Drawing on years of expertise, the AT&M team delivers sophisticated solutions ranging from prototyping to mass production. To support future growth in quality, AT&M recently expanded its machinery fleet with an Ersa VERSAFLOW 4/55 selective soldering machine.
    Published
    18 November 2026
    Reading time
    5 minutes
    Section
    Technology

    At its Perth location in Western Australia, Advanced Technology & Manufacturing produces complex assemblies for customers across diverse industries such as mining, medical technology, defense, environmental technology, and communications technology. Founded in 1985, the company now employs around 40 people and operates three production sites with a total of five production lines. Jason Dean, Production Manager and with the company since 1997, has witnessed this development over many years: “When I began at AT&M, the company was still in its earlier growth phase with a modest machine park; Ersa wasn’t in the picture back then.”

    Perth site of Advanced Technology & Manufacturing
    Perth site of Advanced Technology & Manufacturing (AT&M) — Ersa

    Clear requirements for a selective soldering system

    Today, production consists of five SMT lines supported by two wave soldering machines and the newly installed Ersa VERSAFLOW 4/55 selective soldering system for PTH assembly. The mix of different serial orders, smaller batch sizes, and frequently changing products places high demands on process efficiency and equipment flexibility, which AT&M can now meet even better with the new selective soldering system.

    There was a reason for the latest purchase: On numerous projects involving larger boards, AT&M’s production was increasingly reaching its limits; customers and applications demanded greater process reliability, reproducible results, and complete traceability. “We were looking for a selective soldering system that delivers traceability and reproducibility with good quality,” says Jason Dean, describing the situation. Equally important was the ability to reliably process even heavy PCBs – a key consideration for numerous industrial applications in the Australian market. After ten years of positive experience with Ersa soldering systems in the wave and reflow sectors, the inquiry for the planned selective soldering machine also went to Ersa.

    Decision following practical testing at the Ersa Demo Center

    To realistically test the requirements, Jason Dean made the long journey from Perth to Wertheim. At the Ersa Demo Center, AT&M assemblies were tested under production-like conditions – including heavy boards with complex geometries. Although only a base system with a single soldering module was available there, the performance of the selective soldering platform was impressive. It quickly became clear to AT&M that the modular architecture of the VERSAFLOW 4 series provided the right foundation for their specific requirements – the Australians opted for the version with two soldering modules and four solder pots. “From today’s perspective, the trip was definitely worth it – both in terms of the systems we acquired and the opportunity to meet many Ersa colleagues in Germany in person,” says Jason Dean.

    Customised configuration for higher throughput

    The VERSAFLOW 4/55 was installed in the fall of 2025 – in addition to the two soldering modules, the selective soldering machine also features a VERSAFLUX module. It is precisely this configuration that brings significant advantages for AT&M in its day-to-day operations: Two independently operating axis systems enable flexible processing strategies and shorter cycle times. This allows for the efficient handling of different products without limiting productivity. In practice, this is crucial: at AT&M, product changes sometimes occur up to three times a day, while in other cases a single assembly runs for an entire week. Production must therefore be able to handle both quick changeovers and longer runs economically.

    View of the Ersa VERSAFLOW 4/55 in the electronics manufacturing facility at Advanced Technology in Perth
    View of the Ersa VERSAFLOW 4/55 in the electronics manufacturing facility at Advanced Technology in Perth — Ersa

    Smooth commissioning in Western Australia

    Ersa Machine and Process Specialist Stefan Brauner from Germany was on site in Perth for a week to handle the installation. After delivery, the commissioning went remarkably smoothly, leaving time for a few training sessions. “There were actually no bugs during setup; we were able to start production immediately,” reports Jason Dean. This is a crucial factor, especially for companies in geographically remote regions, as production interruptions or lengthy service calls are much harder to compensate for than in densely networked industrial regions.

    Reliability as a key decision-making factor

    Operating from Western Australia has reinforced AT&M’s focus on investing in highly reliable, high-performance equipment. “With much of the industry support network based on the east coast, it’s important for us to partner with suppliers whose systems are robust, dependable, and built for long-term performance.” The Ersa soldering systems used at AT&M have proven themselves time and again – the Australians use Ersa’s POWERFLOW, HOTFLOW, and ETS-330 systems, among others. Jason Dean recalls previous brands used in the past: “There were various issues, such as with profile creation and zone handling. After seeing Ersa machines in operation, the difference was immediately apparent – that was a game changer for us. This was made possible by the Australian distributor Machinery Forum in Melbourne, with whom we have also enjoyed a trusting partnership for many years – at this point, I would especially like to mention Sales Manager Tony Stathopoulos and Service Engineer Gilbert Monton.”

    Immediately measurable benefits during operation

    In no time at all, the new VERSAFLOW 4/55 has firmly established itself in AT&M’s daily production routine. The verdict from Perth is clear: “The recently installed VERSAFLOW 4/55 is performing very well – we are absolutely thrilled with the Ersa selective soldering machine, which delivers consistently reliable, reproducible quality.” For AT&M, the investment means greater capacity, higher process stability, and a future-proof foundation for further growth. An additional line is already in the planning stages – as with the selective soldering platform, this is the next logical step for AT&M in expanding its long-term manufacturing strategy, for which the Western Australian company continues to rely on its proven partnership with Machinery Forum in Melbourne and Ersa’s headquarters in Wertheim.

    Author: Tom Berx, Area Sales Manager, Ersa GmbH, Wertheim

    More from Technology

    More recent articles from Technology.

    All articles from Technology
    Wafer inspection with nanometre precision: positioning and inspection methodsFoto: LMI Technologies / PEAK Metrology
    Technology

    Wafer inspection with nanometre precision: positioning and inspection methods

    18 November 2026

    Even the smallest irregularity on a wafer surface can jeopardise microchip production. How a submicrometre positioning system and a confocal line sensor work together in quality assurance.

    SMT meets Semicon – When a circuit board becomes a componentFoto: iStock
    Technology

    SMT meets Semicon – When a circuit board becomes a component

    18 November 2026

    A System on Module is a printed circuit board used as a component – and falls precisely into the seam between the SMT and semiconductor packaging rule sets. Why substrate flatness and bump measurement are becoming the…

    Plasmatreat Targets Medical Component Surfaces with Plasma Portfolio at COMPAMED 2026Foto: Plasmatreat (semicon)
    Technology

    Plasmatreat Targets Medical Component Surfaces with Plasma Portfolio at COMPAMED 2026

    18 November 2026

    Plasmatreat is showcasing atmospheric and low-pressure plasma solutions for cleaning, activation, and functional coating of medical components at COMPAMED 2026, including a claimed world first in catheter treatment…

    Plasmatreat Expands Portfolio with Low-Pressure Plasma and Announces Leadership TransitionFoto: Plasmatreat (semicon)
    Technology

    Plasmatreat Expands Portfolio with Low-Pressure Plasma and Announces Leadership Transition

    17 November 2026

    Plasmatreat has introduced AURORA-Plasma, a low-pressure plasma solution complementing its established Openair-Plasma and PlasmaPlus portfolios, while completing a generational leadership handover to Lukas and Magnus…

    ← Zurück zu TechnologyTo the homepage