- Can load a huge quantity of parts: In order to support the large volume of part types required for high-mix production, up to 180 different part types in tape can be set on the machine. In addition, the supply units can be easily changed, with a wide variety of units available to supply parts from trays and sticks in addition to tape.
- Selectable robot configuration: The head types as well as the number of robots can be selected to match changes in the type and scale of production. (Up to 4 robots per machine)
- Efficient support for New Production Introduction (NPI): Auto Shape Generator at the machine is now offered as standard to reduce the time required to ramp up production from introducing a panel type during high-mix low-volume production. When using the NPI support function and a vision processing error occurs at the machine, fast continuation of production is possible because vision processing data is automatically recreated based on the actual acquired image. This reduces the production startup work when products are changed.
- Dual lane independent production: This machine can perform dual lane independent production of different panels at the same time by using double conveyors. With this setup, while one lane is producing, changeover can be performed at the other lane. This means that the equivalent of two lines can be operated while only using a single line of machines.
- Handles a wide range of panel sizes: The system supports small panels from 48x48mm (1.89“x1.89“) to very large panels up to 759x686mm (29.88“x 7“). This allows it to efficiently produce a wide range of panels, from small ones such as those used in mobile phones and digital cameras to medium size panels such as those needed for network boards and notebook computers, as well as long LED panels and LCD-TV panels.
- Multi feeder unit (MFU): A multi feeder unit that can be used to exchange feeders as a group is used as the feeder supply unit. When the offline power supply unit (option) is used, feeders can be setup on the MFU offline and all of the feeders on the unit can be rewound automatically with the touch of a button. This makes external changeover work more efficient and faster.
- Tray units can be set at both sides of the machine: Tray units used to supply parts in trays can be loaded at the front or back side of machines. Non-stop tray part supply is possible using the independent magazine configuration from Fuji. This makes it possible to reduce the amount of time the machine is stopped when tray parts run out during production.
- Support for 38.1mm (1.5inch) part heights: Parts up to 38.1mm (1.5inch) in height can be handled on the system with the odd-form part OF head. This allows the machine to place tall parts up to 38.1mm in height such as large scale relays and LAN connectors that are commonly used for automotive panels and motherboards just by changing the parts supply unit.
