Homepage » Top-News » News »

Moisture barriers for flexible electronics

News
Moisture barriers for flexible electronics

Defects on plastic substrates such as pinholes, cracks and grain boundaries cause a ‚pore effect‘, where oxygen and water molecules are able to seep through and penetrate through the plastic barrier and into the active material. For applications such as flexible OLED displays, organic solar cells, or even electrophoretic displays, sensitivity to oxygen and moisture compromises device lifetime significantly. This means that in order to achieve adequate lifetime for flexible devices that would make viable commercial products, the pathway for oxygen and moisture down into the active layers must be blocked. Tera-Barrier Films is a portfolio company of Exploit Technologies Pte. Ltd. (ETPL), the commercialisation arm of Singapore’s Agency for Science, Technology and Research and Applied Ventures. The company was incubated by Exploit-Technologies as a flagship programme for two years prior to spin-off. Current barrier technologies focus on reducing these defects by using alternate organic and inorganic multilayers coated on plastic. In contrast, Tera-Barrier has taken an innovative approach to resolve the ‚pore effect‘ by literally plugging the defects in the barrier oxide films using nanoparticles. This reduces the number of barrier layers needed in the construction of the barrier film down to two layers in this unique nanoengineered barrier stack. The company’s barrier stack consists of barrier oxide layers and nanoparticulate sealing layers. The nanoparticles used in the barrier film have a dual function – not only sealing the defect but also actively reacting with and retaining the moisture and oxygen. The result is a moisture barrier performance of better than 10–6 g/m2.day which satisfies even the most stringent requirements for flexible organic device substrates. The barrier film also has a lag time of more than 2,300 hours at 60 °C and 90% RH. It’s also important to point out that the barrier layer on its own is not an adequate way to keep oxygen and moisture away from the active materials. Moisture ingress can also occur from the side of the device if it is not adequately sealed. This leads to specific requirements in water vapour transmission rates for the sealants used in electronic devices. Two of the main companies developing these types of adhesives are Henkel and Delo, Henkel focused mainly on thermally-cured solutions while Delo is focused on UV-cured adhesives. A trade-off becomes apparent when trying to find the right balance of permeation rates and flexibility. The adhesives that are characterised by the best performance in terms of water vapour transmission are more rigid and would compromise the overall flexibility of the final device. This means that in order to manufacture devices of a given flexibility, permeation performance needs to be sacrificed. Hence, a lot of research and development effort is focused into the development of systems that would lead to a good balance between permeation performance and flexibility.

Current Issue
Titelbild EPP EUROPE Electronics Production and Test 11
Issue
11.2023
READ
Newsletter

Subscribe to our newsletter now

Webinars & Webcasts

First hand technical knowledge

Whitepapers

Find all current Whitepapers here

Videos

Find all current videos here


Industrie.de Infoservice
Vielen Dank für Ihre Bestellung!
Sie erhalten in Kürze eine Bestätigung per E-Mail.
Von Ihnen ausgesucht:
Weitere Informationen gewünscht?
Einfach neue Dokumente auswählen
und zuletzt Adresse eingeben.
Wie funktioniert der Industrie.de Infoservice?
Zur Hilfeseite »
Ihre Adresse:














Die Konradin Verlag Robert Kohlhammer GmbH erhebt, verarbeitet und nutzt die Daten, die der Nutzer bei der Registrierung zum Industrie.de Infoservice freiwillig zur Verfügung stellt, zum Zwecke der Erfüllung dieses Nutzungsverhältnisses. Der Nutzer erhält damit Zugang zu den Dokumenten des Industrie.de Infoservice.
AGB
datenschutz-online@konradin.de