Homepage » Technology » Products »

Silicone resin protects LED lighting and preserves its aesthetics

Products
Silicone resin protects LED lighting and preserves its aesthetics

Modern commercial lighting systems have to meet a variety of standards and specifications. Robust construction and adequate environmental protection are essential for most commercial applications, but frequently the designer may wish to combine these properties with an aesthetically pleasing appearance. The lighting must be tough, functional but also look good. Recently, Electrolube was approached by one of its customers – a manufacturer of LED lighting systems – for advice on a new project it was undertaking to supply luminaires for use in a range of commercial buildings and hotel lobbies. The location and design of these buildings presented certain challenges for the company’s customer. In terms of environmental protection, the lighting units needed to be resistant to UV light and outside weather conditions; but as the units were likely to be visible even when the lights were switched off, cosmetically, they needed to be of a very high standard. The key requirement was to protect the LED units from corrosion without compromising their appearance. The customer needed a protective material for the LEDs that would provide the required environmental protection while preserving the units’ high quality finish. As this particular customer had limited experience of using protective material, the company set about to determine the best approaches to the problem. Following an appraisal of its customer’s needs, the company recommended its silicone resin SC3001 for the application as it offered excellent clarity as well as good protection against harsh weather conditions. It is an optically clear, RoHS-2 compliant (2011/65/EU), flexible, two-part encapsulation compound that is particularly suited for use in the LED lighting industry, where optical clarity is vital. It is very easily applied in thin films due to its low viscosity and moisture cure nature.

As well as supplying the appropriate encapsulation material, the company also offered advice about potting methods and the selection of appropriate production equipment.
Current Issue
Titelbild EPP EUROPE Electronics Production and Test 11
Issue
11.2023
READ
Newsletter

Subscribe to our newsletter now

Webinars & Webcasts

First hand technical knowledge

Whitepapers

Find all current Whitepapers here

Videos

Find all current videos here


Industrie.de Infoservice
Vielen Dank für Ihre Bestellung!
Sie erhalten in Kürze eine Bestätigung per E-Mail.
Von Ihnen ausgesucht:
Weitere Informationen gewünscht?
Einfach neue Dokumente auswählen
und zuletzt Adresse eingeben.
Wie funktioniert der Industrie.de Infoservice?
Zur Hilfeseite »
Ihre Adresse:














Die Konradin Verlag Robert Kohlhammer GmbH erhebt, verarbeitet und nutzt die Daten, die der Nutzer bei der Registrierung zum Industrie.de Infoservice freiwillig zur Verfügung stellt, zum Zwecke der Erfüllung dieses Nutzungsverhältnisses. Der Nutzer erhält damit Zugang zu den Dokumenten des Industrie.de Infoservice.
AGB
datenschutz-online@konradin.de