Homepage » Technology » Products »

Dopag introduces progressive cavity pump systems for 1K and 2K materials

Continuous metering of adhesives and sealants
Dopag introduces progressive cavity pump systems for 1K and 2K materials

When processing adhesives and sealants, as well as epoxy resin and silicone, for certain applications, continuous metering is necessary. Metering systems with progressive cavity pumps are suitable for this. These work based on the volumetric metering principle, meaning that they enable highly precise metering of the material quantity.

Dopag, manufacturer of metering technology, has announced that it now offers two metering systems with progressive cavity pumps:

  • Rotordis for processing single-component materials
  • Rotormix for metering and mixing mutli-component materials

Progressive cavity pumps work with no pulsation. Consisting of two components, the stator-rotor combination is the heart of the progressive cavity pump. This is a volumetric metering system that is sealed leak-free. It conveys the material continuously without any restrictions on volume, with low shear and gently in an axial direction. Progressive cavity pumps are therefore highly suitable for processing filled and abrasive materials. Rotordis and Rotormix are each available in four different nominal sizes: 0.01, 0.05, 0.15 and 0.30 ml/U. Rotordis enables shot sizes from 0.002 ml (2 μl) to be processed at a discharge rate of 0.13–45 ml/min, while Rotormix enables shot sizes from 0.006 ml (6 μl) to be processed at a discharge rate of 0.26–90 ml/min. In both cases, this is dependent on the viscosity and, in the case of Rotormix, also on the mixing ratio. Metering precision is ± 1 per cent.

Reliable material supply

With these two cavity pump systems, materials with different viscosities can be processed, ranging from water-thin to highly viscous or pasty. Depending on the viscosity, cartridges, pressure tanks or barrel pumps can be used. With both systems, application is generally carried out directly from the metering system onto the component by means of a nozzle or mixing tube. A DC drive enables dynamic metering and a controllable back suction effect. This ensures a clean thread break at all times.

A specially developed electronic metering control unit ensures optimal adaptation of all application-specific parameters. In addition, straightforward integration into automated production processes is ensured thanks to a standardised interface.

Benefits of the progressive cavity pump systems at a glance:

  • Uninterrupted metering
  • Pulsation-free and low-shear
  • Can convey abrasive materials
  • High repeatability
  • Configurable back suction effect
  • Variable mixing ratio with the 2K system rotormix
  • Comprehensive range of accessories available (cartridges, nozzles, plastic mixers, etc.)

www.dopag.com

Current Issue
Titelbild EPP EUROPE Electronics Production and Test 11
Issue
11.2023
READ
Newsletter

Subscribe to our newsletter now

Webinars & Webcasts

First hand technical knowledge

Whitepapers

Find all current Whitepapers here

Videos

Find all current videos here


Industrie.de Infoservice
Vielen Dank für Ihre Bestellung!
Sie erhalten in Kürze eine Bestätigung per E-Mail.
Von Ihnen ausgesucht:
Weitere Informationen gewünscht?
Einfach neue Dokumente auswählen
und zuletzt Adresse eingeben.
Wie funktioniert der Industrie.de Infoservice?
Zur Hilfeseite »
Ihre Adresse:














Die Konradin Verlag Robert Kohlhammer GmbH erhebt, verarbeitet und nutzt die Daten, die der Nutzer bei der Registrierung zum Industrie.de Infoservice freiwillig zur Verfügung stellt, zum Zwecke der Erfüllung dieses Nutzungsverhältnisses. Der Nutzer erhält damit Zugang zu den Dokumenten des Industrie.de Infoservice.
AGB
datenschutz-online@konradin.de