Homepage » Technology » Products »

2D and 3D automated inspection systems at Apex 2015

Creating 3D data for every solder joint
2D and 3D automated inspection systems at Apex 2015

2D and 3D automated inspection systems at Apex 2015
In-line 3D automated X-ray inspection system BF-X3
Saki Corporation, an innovator in the field of automated optical inspection equipment, announces that its new BF-X3 in-line 3D automated X-ray inspection, BF-3Di automated optical inspection, and BF-10BT offline 2D automated optical inspection systems exhibited at IPC Apex Expo 2015 in San Diego, California.

The BF-X3 in-line 3D automated X-ray inspection system measures solder joint structures, even non-wetting and head-in-pillow, creating 3D data for every solder joint. The BF-X3 uses planar computed tomography (PCT) to capture 100 slices through the board, solder joints, and components, analyzing their internal structures for a true volumetric representation of 3D imaging. Automated inspection technology perfectly separates the top and bottom of the PCB, corrects position misalignment and warpage, and measures and classifies defects, creating 3D data for the entire sample. It gives best-in-class Cpk and gage repeatability and reproducibility and maximum test coverage with lowest escape and false call rates. The BF-X3 inspects and measures the solder joint structures of BGAs, LGAs, QFNs, plated through-holes, leaded ICs, and PoP lamination in 3D with high definition.
The BF-3Di uses its unique optical design and 4-way projection for 3D inspection of all parts on the PCB with brightness controlled and shadows eliminated. It inspects heights up to 20mm and parts as small as 01005s, capturing reversed or inclined components with an escape of less than 1 ppm. Its high-speed, real-time measurement for a broad range of substrate coverage greatly reduces programming and debugging time. Inspection data is quickly and easily generated from CAD data.
For offline 2D automated optical inspection, especially for double-sided boards, the company showed its BF-10BT system. It inspects both sides of the board in one process, detecting solder balls down to 150μm, with 10μm resolution and superior data handling. Its robust and highly repeatable hardware is built for 24/7 continuous operation. The system is perfect for final inspection, through-hole inspection after wave or selective soldering, and manual inspection.
Current Issue
Titelbild EPP EUROPE Electronics Production and Test 11
Issue
11.2023
READ
Newsletter

Subscribe to our newsletter now

Webinars & Webcasts

First hand technical knowledge

Whitepapers

Find all current Whitepapers here

Videos

Find all current videos here


Industrie.de Infoservice
Vielen Dank für Ihre Bestellung!
Sie erhalten in Kürze eine Bestätigung per E-Mail.
Von Ihnen ausgesucht:
Weitere Informationen gewünscht?
Einfach neue Dokumente auswählen
und zuletzt Adresse eingeben.
Wie funktioniert der Industrie.de Infoservice?
Zur Hilfeseite »
Ihre Adresse:














Die Konradin Verlag Robert Kohlhammer GmbH erhebt, verarbeitet und nutzt die Daten, die der Nutzer bei der Registrierung zum Industrie.de Infoservice freiwillig zur Verfügung stellt, zum Zwecke der Erfüllung dieses Nutzungsverhältnisses. Der Nutzer erhält damit Zugang zu den Dokumenten des Industrie.de Infoservice.
AGB
datenschutz-online@konradin.de