Dage Assure Flex automation
The new generation of component counting. Assure Flex automation is the fully automatic, operator free reel counting solution. Tailored to specific needs, a broad spectrum of loading and unloading options are available for high throughput stand-alone operation. It can also be integrated into a wide range of high capacity storage systems.
Assure Flex is the complete counting solution for every workflow, from walk up operator loading to inline operator free. It has an integrated conveyor and can be easily connected to the modules of the series.
Matrix X series
The X series is Matrix’s high-speed AXI platform. It comes with linear drives for the table axes and detector axes. This motion system guarantees very high speed and the utmost accuracy for positioning.
It is available with the SMT setup:
- 130 kV, 40 W sealed tube
- 14 bit FPD with 50 µm pixel pitch
The X series machines feature the following configurations/imaging techniques:
- X2: 2D + SFT
- X2.5: 2D + off-axis (2.5D) + SFT
- X3: 2D + off-axis (2.5D) + Planar CT (3D) + SFT
This platform features the Planar CT, which was released in October 2020, providing increased slice quality for 3D inspection and decreased cycle time.
The maximum resolution with the X series machines is 3 µm, making it the perfect choice for solder joint inspection, for the analysis of the following:
Sonoscan Gen7 C-SAM
The Gen7 C-SAM inspection system is the latest generation in acoustic micro imaging. The Gen7 delivers advanced hardware allowing new features and analysis that can now be completed faster than ever before.
Advanced features such as PolyGate, SonoSimulator, Virtual Rescanning Mode (VRM) and Frequency Domain Imaging (FDI) add value and confidence. With its large, easy access illuminated scanning area, the Gen7 has the capability to efficiently scan everything from a small part up to 350 mm sized parts.
Yestech LX-1000 Large Area In-line AOI
This automated optical inspection system offers high-speed PCB assembly inspection with exceptional defect coverage, inspecting solder joints and verifying correct part assembly, enabling users to improve quality and increase throughput.
- Single or dual sided imaging with full travel imaging sensors
- 630 mm x 630 mm large inspection area
- Optional 3D and/or 2D automated inspection
- Up to 100 mm clearance
- Heavy duty conveyor options for samples to 15 kg
- High defect coverage / low false failure rate
- MES / Industry 4.0 compatible
28601 Clemens Road
Westlake, OH 44145 USA
Tel.: +1 (440) 892–1580