Homepage » Technology »

Modern X-ray and AOI from Viscom at Apex

Reliable inspection
Modern X-ray and AOI from Viscom at Apex

Viscom Inc. announced that it will exhibit at the 2020 IPC Apex Expo, scheduled to take place Feb. 4–6, 2020. Always at the forefront of innovation for AOI, AXI and SPI, the company will show its X8011-II and X7056-II 3D X-ray inspection systems, along with the S3088 ultra chrome and S3088 DT.

Automatic 3D inspection

The X7056-II automatic 3D X-ray inspection system features high throughput and superb image quality for the requirements in high-end electronics production. This AXI in-line system can ensure precise inspection of hidden solder joints and components in high-volume production. It is equipped with the xFastFlow transport module, which cuts printed circuit board changing times. With this feature, up to three boards can be processed at the same time. The new handling design also means that significantly larger board sizes can be inspected and the scope of angled radiation is extended.

S3088 DT system

The S3088 DT is configured as standard with a dual-track system for use in automatic optical inspection (3D AOI). The system features a unique combination of affordability, efficiency, speed and technical performance that meets all the requirements of large-scale mass production today, including, for instance, full connection to Industry 4.0 interfaces. The S3088 DT ensures reliable inspection of sophisticated 03015 components at an impressive throughput rate.

X8011-II PCB X-ray inspection

The connectors on BGAs, QFNs or QFPs are mostly hidden, and can only be reliably checked with X-ray inspection. The X8011-II PCB high resolution semi-automatic X-ray inspection system was developed especially for these tasks. Typical applications are, for example, the inspection of electronic assemblies and components, quality assurance in power electronics, or non-destructive special inspections.

S3088 ultra chrome technology

The S3088 ultra chrome is based on Viscom’s unique 3D AOI technology and combines accurate defect detection with high inspection speed. This makes the system the first choice for efficient SMT production.

Some of the features include inspection speed of up to 65 cm2/s and 65 mega pixels of information in each 50 mm x 50  mm field of view. The resolution is switchable, and with 10 µm per pixel even 03015 components can be reliably inspected. Together with the eight angled-view cameras, a virtually shadow-free 3D inspection is one of the key advantages of the system.

Apex, Booth 3336


Company contact

Viscom Inc.
1775 Breckinridge Parkway, Suite 500
30096 Duluth, GA
Tel.: +1 (678) 966–9835
E-mail: info@viscomusa.com
Website: www.viscom.com

Also of interest:

Viscom’s inline X-ray system for complex requirements

Current Issue
Titelbild EPP EUROPE Electronics Production and Test 11
Issue
11.2023
READ
Newsletter

Subscribe to our newsletter now

Webinars & Webcasts

First hand technical knowledge

Whitepapers

Find all current Whitepapers here

Videos

Find all current videos here


Industrie.de Infoservice
Vielen Dank für Ihre Bestellung!
Sie erhalten in Kürze eine Bestätigung per E-Mail.
Von Ihnen ausgesucht:
Weitere Informationen gewünscht?
Einfach neue Dokumente auswählen
und zuletzt Adresse eingeben.
Wie funktioniert der Industrie.de Infoservice?
Zur Hilfeseite »
Ihre Adresse:














Die Konradin Verlag Robert Kohlhammer GmbH erhebt, verarbeitet und nutzt die Daten, die der Nutzer bei der Registrierung zum Industrie.de Infoservice freiwillig zur Verfügung stellt, zum Zwecke der Erfüllung dieses Nutzungsverhältnisses. Der Nutzer erhält damit Zugang zu den Dokumenten des Industrie.de Infoservice.
AGB
datenschutz-online@konradin.de