Homepage » AOI & AXI »

Mirtec displays 3D AOI and SPI at Apex 2021 Virtual Expo

Inspection towards Industry 4.0
Mirtec displays 3D AOI and SPI at Apex 2021 Virtual Expo

Mirtec is pleased to announce its participation in the 2021 IPC Apex Virtual Expo, scheduled to take place March 9–11, 2021.

“We are looking forward to participating in the IPC Apex Virtual Expo,” stated Brian D’Amico, President the North American Sales and Service Division. “Mirtec will feature video feed and information about our award-winning inspection solutions specifically designed to address the full spectrum of inspection requirements associated with the electronics manufacturing industry.”

The MV-6 Omni 3D AOI machine is configured with the Omni-Vision 3D inspection technology which combines 15 Mega Pixel CoaXPress camera technology with the digital tri-frequency Moiré 3D system in a cost-effective platform. The 15 Mega Pixel CoaXPress vision system is a proprietary camera system designed and manufactured by the company for use with the complete product range of 3D inspection systems. Twelve projection digital tri-frequency Moiré technology provides true 3D inspection to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow. Fully configured, the MV-6 Omni machines feature four 10 mega pixel side-view cameras in addition to the 15 mega pixel top-down camera. There is little doubt that this new technology has set the standard by which all other inspection equipment is measured.

The MV-3 Omni desktop 3D AOI machine is configured with the same hardware and software as the in-line Omni-Vision 3D inspection system providing 100 % compatibility across the company’s 3D AOI product line. These systems feature the Omni-Vision 3D inspection technology which combines 15 mega pixel CoaXPress camera technology with the digital tri-frequency Moiré 3D system in a cost-effective platform. The 15 mega pixel CoaXPress vision system is a proprietary camera system designed and manufactured by the company for use with their range of 3D inspection systems. The twelve-projection digital tri-frequency Moiré technology provides 3D inspection to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow. The fully configured MV-6 OMNI machines feature four 10 mega pixel side-view cameras in addition to the 15 mega pixel top-down camera.

Smart inspection software

The company’s automatic programming software uses Artificial Intelligence based Deep Learning methodology to minimize human error and standardize the programming process. This advanced software solution automatically analyzes the PCB architecture and assigns the appropriate part type and process parameters for each SMT device thereby maximizing programming efficiency. Only basic operator training is required to achieve optimal inspection results.

Mirtec’s Optical Character Recognition (OCR) technology reduces false calls and improves production process efficiency by automatically restoring and inspecting damaged characters through AI and Deep Learning.

The MS-11e 3D SPI machine is configured with an exclusive 15 mega pixel CoaXPress camera system, providing enhanced image quality, superior accuracy, and incredibly fast inspection rates.

The machine uses dual projection shadow free Moiré phase shift imaging, excessive technology to inspect solder paste depositions on PCBs post screen print for insufficient solder, shape deformity, shift of deposition and bridging.

Leading the way to Industry 4.0

Mirtec’s Total Remote Management System (TRMS) is a fully integrated Industry 4.0 solution which combines remote management with real-time data monitoring and analysis for each system within the SMT production line. Their TRMS provides real-time remote monitoring of status information and statistical data such as equipment operation status, production yield, PC resources, temperature, humidity, etc.

The combination of the 3D inspection systems and TRMS provide a vast improvement in production process management. The TRMS module is a key part of the company’s intelligent factory automation system, Intellisys. This powerful software suite was designed and developed to provide manufacturers with a clear view into the manufacturing process, thereby helping them achieve higher operating efficiencies and improved quality.


Company contact

Mirtec Corp.
3 Morse Road
Oxford, CT 06478 USA
Tel.: +1 (203) 881–5559
E-Mail: marketing@mirtec.com
Website: www.mirtec.com

Current Issue
Titelbild EPP EUROPE Electronics Production and Test 11
Issue
11.2023
READ
Newsletter

Subscribe to our newsletter now

Webinars & Webcasts

First hand technical knowledge

Whitepapers

Find all current Whitepapers here

Videos

Find all current videos here


Industrie.de Infoservice
Vielen Dank für Ihre Bestellung!
Sie erhalten in Kürze eine Bestätigung per E-Mail.
Von Ihnen ausgesucht:
Weitere Informationen gewünscht?
Einfach neue Dokumente auswählen
und zuletzt Adresse eingeben.
Wie funktioniert der Industrie.de Infoservice?
Zur Hilfeseite »
Ihre Adresse:














Die Konradin Verlag Robert Kohlhammer GmbH erhebt, verarbeitet und nutzt die Daten, die der Nutzer bei der Registrierung zum Industrie.de Infoservice freiwillig zur Verfügung stellt, zum Zwecke der Erfüllung dieses Nutzungsverhältnisses. Der Nutzer erhält damit Zugang zu den Dokumenten des Industrie.de Infoservice.
AGB
datenschutz-online@konradin.de