Homepage » Allgemein »

Performing lead-free soldering, desoldering and rework

Just one tool system is sufficient
Performing lead-free soldering, desoldering and rework

471987

A Multi Function Rework System or MFR utilizes a manufacturer´s smartheat technology. Therefore, this system meets all of today’s lead-free soldering challenges. With a single unit the most complex electronics assemblies can now be soldered, desoldered and reworked.
The MFR Series uses a comprehensive array of tools promising flexibility, capability, reliability and value. MFR has a compact power unit that offers two ports to which any of the MFR Series tools can be attached quickly and easily for rework applications, SMT tasks, through-hole soldering and desoldering. For heavier or more varied workloads, multiple units can be interlocked to power as many tools as necessary. The MFR Series offers a choice of heater tips or tip cartridges. The heater tips are designed to provide a cost-effective option to meet the demands of point to point production soldering, while tip cartridges are suitable for high performance soldering and rework applications.
The MFR Series tools, interchangeable heater tips and tip cartridges are extremely easy to assemble and use, and are ideal for demanding lead-free materials. This is due to the smart heat technology, as the manufacturer himself has named it. This smart heat technology takes the guesswork out of heat management by sensing the amount of heat energy that is needed at the pad, and providing this accurately and instantaneously.With this technology, the manufacturer promises guaranteed solder joint reliability, minimized cost of ownership, maximized throughput and protection of PCBs and components from heat damage. Sensitive components are further protected from damage by ESD-safe materials and built-in ground continuity-sensing technology.
MFR Series includes an array of different tools:
  • The patent-pending Precision Tweezer System, or PTZ; its dual fine point adjustment and pivot action allows even the smallest SMT devices, such as 0201 chip capacitors, to be handled during rework
  • The Solder/Rework Cartridge System or SRC for fast, high performance soldering and rework applications
  • The Production Solder Tip System or PST for cost-effective point to point production soldering
  • The Desoldering Stations DSI and DSX
The lightweight hand pieces are designed for comfort and control with excellent tip-to-grip distance. The range of tip cartridge and the heater tip geometries ensure easy access and precision performance in a wide variety of applications.
The “Auto Standby” and “Auto Off” functions use motion detection technology to save on energy usage and prolong tip life. The tip condition is enhanced by a special work stand design that incorporates tip cleaning and maintenance. Cost of ownership is minimized as the MFR Series requires no calibration.
Regarding cost of ownership another low cost rework system may be favorable: the HCT-900 Hand Held Convection Tool. It provides the flexibility to handle a wide range of thermally demanding production and rework applications, including lead-free. Typical applications for the 300W unit include removal or replacement of QFPs, PLCCs, SOPs and TSOP devices. It can also be used to provide heating and reflow for touch-up work as well as heat shrink and other local heating applications.
 
EPP EUROPE 416

Zusammenfassung 
Die Anforderungen bleifreien Lötens lassen sich mit speziellen Werkzeugen verschiedener Hersteller erfüllen, was natürlich kostet. Kostengünstiger kann es sein, nur ein Werkzeugsystem zu verwenden – und zwar von einem Hersteller mit gutem Kundendienst. Dieses muss allerdings dann auch zuverlässig alle Lötaufgaben und Wiederbearbeitungsvorgänge mit einer Reihe von Werkzeugen gewährleisten. Das MFR-Lötwerkzeugsystem ist dazu in der Lage.
Résumé
Les exigences de la soudure sans plomb peuvent être remplies en utilisant les outils spéciaux de différents fabricants, ce qui a bien sûr un coût. Il peut être plus avantageux de n’utiliser qu’un unique système, provenant d’un fabricant disposant d’un bon service après-vente. Mais ce système doit permettre de réaliser de manière fiable toutes les tâches de soudage et de retouches avec une série d’outils. C’est le cas du système d’outils de soudage MFR.
La saldatura senza piombo richiede l’utilizzo di utensili speciali di produttori diversi e questo ha naturalmente un costo. Più conveniente sarebbe forse utilizzare un unico sistema di utensili, fornito da un produttore con una buona assistenza clienti. Tale produttore dovrebbe naturalmente fornire una serie di utensili affidabili per tutti i lavori di saldatura e i processi di rilavorazione. Il sistema di utensili per saldatura MFR potrebbe essere la soluzione giusta.
Current Issue
Titelbild EPP EUROPE Electronics Production and Test 11
Issue
11.2023
READ
Newsletter

Subscribe to our newsletter now

Webinars & Webcasts

First hand technical knowledge

Whitepapers

Find all current Whitepapers here

Videos

Find all current videos here


Industrie.de Infoservice
Vielen Dank für Ihre Bestellung!
Sie erhalten in Kürze eine Bestätigung per E-Mail.
Von Ihnen ausgesucht:
Weitere Informationen gewünscht?
Einfach neue Dokumente auswählen
und zuletzt Adresse eingeben.
Wie funktioniert der Industrie.de Infoservice?
Zur Hilfeseite »
Ihre Adresse:














Die Konradin Verlag Robert Kohlhammer GmbH erhebt, verarbeitet und nutzt die Daten, die der Nutzer bei der Registrierung zum Industrie.de Infoservice freiwillig zur Verfügung stellt, zum Zwecke der Erfüllung dieses Nutzungsverhältnisses. Der Nutzer erhält damit Zugang zu den Dokumenten des Industrie.de Infoservice.
AGB
datenschutz-online@konradin.de